Fri, 03 Jan 2025 12:45:09 CST | login

Information for RPM sg3_utils-1.48-4.ocs23.loongarch64.rpm

ID210302
Namesg3_utils
Version1.48
Release4.ocs23
Epoch
Archloongarch64
SummaryUtilities for devices that use SCSI command sets
DescriptionCollection of Linux utilities for devices that use the SCSI command set. Includes utilities to copy data based on "dd" syntax and semantics (called sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check mode and log pages (sginfo, sg_modes and sg_logs); spin up and down disks (sg_start); do self tests (sg_senddiag); and various other functions. See the README, ChangeLog and COVERAGE files. Requires the linux kernel 2.4 series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0) must be used. In the 2.6 series and later other device names may be used as well (e.g. /dev/sda). Also some support for NVMe devices, especially with sg_ses on NVMe enclosures. Warning: Some of these tools access the internals of your system and the incorrect usage of them may render your system inoperable.
Build Time2024-09-26 12:48:23 GMT
Size1.12 MB
f418f58f58001c73d8cf5f54bf202884
LicenseGPL
Buildrootdist-ocs23-base-build-287155-27926
Provides
sg3_utils = 1.48-4.ocs23
sg3_utils(loongarch-64) = 1.48-4.ocs23
Obsoletes No Obsoletes
Conflicts No Conflicts
Requires
/usr/bin/bash
ld-linux-loongarch-lp64d.so.1()(64bit)
ld-linux-loongarch-lp64d.so.1(GLIBC_2.36)(64bit)
libc.so.6()(64bit)
libc.so.6(GLIBC_2.36)(64bit)
libc.so.6(GLIBC_2.38)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libgcc_s.so.1(GCC_3.3.1)(64bit)
libsgutils2-1.48.so.2()(64bit)
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpmlib(PayloadIsXz) <= 5.2-1
rtld(GNU_HASH)
sg3_utils-libs = 1.48-4.ocs23
Recommends No Recommends
Suggests No Suggests
Supplements No Supplements
Enhances No Enhances
Files
Page:
1 through 50 of 330 >>>
Name ascending sort Size
/usr/bin/rescan-scsi-bus.sh39.45 KB
/usr/bin/scsi-rescan18.00 B
/usr/bin/scsi_logging_level8.39 KB
/usr/bin/scsi_mandat3.52 KB
/usr/bin/scsi_readcap1.30 KB
/usr/bin/scsi_ready1.10 KB
/usr/bin/scsi_satl3.74 KB
/usr/bin/scsi_start1.26 KB
/usr/bin/scsi_stop1.44 KB
/usr/bin/scsi_temperature940.00 B
/usr/bin/sg_bg_ctl51.17 KB
/usr/bin/sg_compare_and_write51.29 KB
/usr/bin/sg_copy_results55.70 KB
/usr/bin/sg_dd67.80 KB
/usr/bin/sg_decode_sense51.34 KB
/usr/bin/sg_emc_trespass50.95 KB
/usr/bin/sg_format51.40 KB
/usr/bin/sg_get_config51.19 KB
/usr/bin/sg_get_elem_status51.47 KB
/usr/bin/sg_get_lba_status51.38 KB
/usr/bin/sg_ident51.15 KB
/usr/bin/sg_inq221.85 KB
/usr/bin/sg_logs228.98 KB
/usr/bin/sg_luns51.41 KB
/usr/bin/sg_map51.09 KB
/usr/bin/sg_map2651.59 KB
/usr/bin/sg_modes67.46 KB
/usr/bin/sg_opcodes51.68 KB
/usr/bin/sg_persist51.40 KB
/usr/bin/sg_prevent51.07 KB
/usr/bin/sg_raw51.44 KB
/usr/bin/sg_rbuf51.22 KB
/usr/bin/sg_rdac51.02 KB
/usr/bin/sg_read51.28 KB
/usr/bin/sg_read_attr51.41 KB
/usr/bin/sg_read_block_limits51.09 KB
/usr/bin/sg_read_buffer52.05 KB
/usr/bin/sg_read_long51.16 KB
/usr/bin/sg_readcap51.41 KB
/usr/bin/sg_reassign51.13 KB
/usr/bin/sg_referrals51.14 KB
/usr/bin/sg_rem_rest_elem51.20 KB
/usr/bin/sg_rep_density51.24 KB
/usr/bin/sg_rep_pip51.23 KB
/usr/bin/sg_rep_zones51.59 KB
/usr/bin/sg_requests51.29 KB
/usr/bin/sg_reset51.10 KB
/usr/bin/sg_reset_wp51.17 KB
/usr/bin/sg_rmsn51.09 KB
/usr/bin/sg_rtpg51.12 KB
Component of No Buildroots